How To Clean Ink Absorber Canon Mx870

When y'all run the automatic internal cleaning system in your Canon printer, accumulated dust particles and dried ink will exist swept from the printhead to prevent clogging and an eventual reduction in print quality. That dirt and backlog ink that is cleaned must go somewhere, however. This is the purpose of the waste ink absorber.

ink absorber full The waste material ink absorber consists of ii foam pads within a rubber frame, the foam absorbs the mess and prevents the loose particles from falling to the flooring of the car. Somewhen, though, the waste material absorber gets full and needs to be emptied and cleaned. You volition know when this time comes as an error message will be triggered and the printer volition not print. This error is either displayed as "Waste Ink Tank Total" or "The Ink Absorber is Full" in the software or on the control console, or a sequence of flashes from the printer's indicator lights will betoken this error when you lot consult the manual.

Many Canon ink printers, namely photo printers, have a simple procedure for cleaning the ink waste matter absorber. Here is a quick list of the steps you need to accept:

Lift the plastic lid to reveal the internal components of the automobile.
Be certain to expect a few seconds while the ink carriage automatically slides out of the fashion.
Locate the black rubber frame that holds the dual absorber pads and pull it until you feel information technology disassemble from the machine.
In one case it detaches, pull the assembly slightly to the left and then lift it out. At this indicate, unplug the power supply.
Remove the two pads from the frame and place all three parts into a container of warm, soapy h2o. Let them sit for a while until the dried ink has loosened, then gently scrub each piece.
Let the pads and frame sit on a newspaper towel or newspaper until each is COMPLETELY dry.
Place the pads dorsum into the slots in the frame and reinstall the frame into its spot on the right side of the printer. Once you are finished, you will need to reset the fault message.

Side by side, reset the error message:

Power down and unplug the printer, then agree the power button down every bit you plug the power supply back in.
Release the button and wait a few seconds.
Striking the power button once again to reset the code.

For other Canon printers, opening the lid of the machine requires tools for removing the plastic casing, springs and multiple screws. Consult your manual or Canon directly to find out which category your model fits into.

This process is also involved to explicate in uncomplicated text, equally it involves a disassembly of near the unabridged auto. Beneath is a video tutorial for printer owners that take to dismantle the machine to access the ink waste cushion pads. If this process seems likewise complex, it may be all-time to take your printer to a service eye rather than effort information technology yourself.